Portable 1598 Channels IMU Surveying South Galaxy G2 Gnss Rtk Base Y Rover

Short Description:

1598 channels, IMU tilt survey 60°.
Internal 2W radio, support Farlink protocol, 8km working range.
Built-in 6800mAh rechargeable battery.
850g Light weight design.
Smart reminder of base station attitude.


Product Detail

Product Tags

South Galaxy G2 banner1

The Extraordinary Inbuilt Radio

Galaxy G2 adopts a new self-developed digital radio module with "Farlink" protocol to achieve the typical working range as 8km. The transmission bandwidth of "Farlink” becomes large, which perfectly solves the problem of large data volume of multiple constellations transmission. And the power consumption can reduce about 60% in the same amount of data transmission compare to the traditional RTK.

Ultimate Goals of Full Signals Tracking

Galaxy G2 adopts high and low frequency integrated antenna design, which using low profile design technology to reduce the physical difference between high and low frequency bands, improves phase center consistency. And the applied frequency selective radiation mechanism would enhance antenna anti-interference ability. And combines with high performance GNSS board, G2 fully supports all of running satellite constellations, especially BeiDou III global satellite signals.

Worry-free Surveying

The new generation of SoC platform gives RTK more stable performance and lower power consumption. The built-in 6800mAh high-performance battery can support 15 hours* of continuous operation. G2 adopts Type-C charging interface which supports PD rapid charging, the battery can be full charged in 3 hours that supports full-day work.

Measure Whatever You Want

Galaxy G2 is integrated with a new generation Inertial Measurement Unit which makes tilt measurement more stable and accurate, the coordinates would be corrected automatically according to the inclination direction and angle of the pole, without strict leveling the receiver to measure the point at will, it helps surveyors boost productivity by 30 percent.

H6 Data Controller
Android 11 Operation System.
9200 mAh Battery, 20 Hours Endurance.
5" High Clarity Display, Full Alphanumeric Keyboard.
8-Core 2.0 GHz CPU, 4+64G Memory, External storage allows 128GB.

Egstar software
Support offline maps.
Increase the registration code copy and share functions.
Update the English translation.
Optimize more details.
Support more southern series RTK.

Specification

​ ​
GNSS Features
Channels 1598
GPS L1, L1C, L2C, L2P, L5
GLONASS G1, G2, G3
​ ​BDS BDS-2: B1I, B2I, B3I
BDS-3: B1I, B3I, B1C, B2a, B2b*
GALILEOS E1, E5A, E5B, E6C, AltBOC*
SBAS L1*
IRNSS L5*
QZSS L1, L2C, L5*
MSS L-Band (Reserve)  
Positioning output rate 1Hz~20Hz
Initialization time < 10s
Initialization reliability > 99.99%
​ ​
Positioning Precision
Code differential ​GNSS positioning Horizontal: 0.25 m + 1 ppm RMS
Vertical: 0.50 m + 1 ppm RMS
GNSS static Horizontal: 2.5 mm + 0.5 ppm RMS
Vertical: 5 mm + 0.5 ppm RMS
Real-time kinematic Horizontal: 8 mm + 1 ppm RMS
(Baseline<30km) Vertical: 15 mm + 1 ppm RMS
SBAS positioning Typically < 5m 3DRMS
RTK initialization time 2 ~ 8s
​ ​IMU tilt compensation Additional horizontal pole tip uncertainty
typically less than 10mm + 0.7 mm/° tilt down to 30°
IMU tilt angle 0° ~ 60°
Hardware Performance Dimension 130.5mm(φ) × 84mm(H)
Weight 850g (battery included)
Material Magnesium aluminum alloy shell
Operating temperature -25℃ ~ +65℃
Storage temperature -35℃ ~ +80℃
Humidity 100% Non-condensing
​ ​Waterproof/Dustproof IP68 standard, protected from long time immersion to depth of 1m IP68 standard, fully protected against blowing dust
Shock/Vibration Withstand 2 meters pole drop onto the cement ground naturally
Power supply 6-28V DC, overvoltage protection
Battery Inbuilt 6800mAh rechargeable, removable Lithium-ion battery
Battery life Single battery: 16h (static mode), 8h (Base + UHF), 12h (Rover + UHF), 15h (Rover + Bluetooth)
Communications I/O Port 5PIN LEMO external power port + Rs232
Type-C interface (charge + OTG + Ethernet)
1 UHF antenna interface
SIM card slot (Micro SIM)
Internal UHF Radio receiver and transmitter, 1W/2W/3W switchable
Frequency range 410 - 470MHz
Communication protocol Farlink, Trimtalk450s, SOUTH, SOUTH+, SOUTHx, HUACE, Hi-target, Satel
Communication range Typically 8km with Farlink protocol
Cellular mobile network 4G cellular module standard, customizable 5G module
Bluetooth Bluetooth 3.0/4.1 standard, Bluetooth 2.1 + EDR
NFC Communication Realizing close range (shorter than 10cm) automatic pair between receiver and controller (controller requires NFC wireless ​communication module else)
WIFI Modem 802.11 b/g standard
WIFI hotspot Receiver broadcasts its hotspot form web UI accessing with any mobile terminals
WIFI datalink Receiver can transmit and receive correction data stream via WiFi datalink
Data Storage / Transmission ​ ​Storage 8GB SSD internal storage standard, extendable up to 64GB
Automatic cycle storage (The earliest data files will be removed automatically while the memory is not enough)
Support external USB storage
The customizable sample interval is up to 20Hz
Data transmission Plug and play mode of USB data transmission
Supports FTP/HTTP data download
​ ​Data format Static data format: STH, Rinex2.01, Rinex3.02 and etc.
Differential data format: CMR, SCMRx, RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1, RTCM 3.2
GPS output data format: NMEA 0183, PJK plane coordinate, Binary code, Trimble GSOF
Network model support: VRS, FKP, MAC, fully support NTRIP protocol
Sensors Electronic bubble Controller software can display electronic bubble, checking leveling status of the carbon pole in real-time
IMU Built-in IMU module, calibration-free and immue to magnetic interference
​ ​Thermometer Built-in thermometer sensor, adopting intelligent temperature control technology, monitoring and adjusting the receiver ​temperature
User Interaction Operating system Linux
Buttons Single button
Indicators 5 LED indicators
​ ​Web interaction With the access of the internal web interface management via WiFi or USB connection, users are able to monitor the receiver status ​and change the configurations freely
​ ​Voice guidance It provides status and operation voice guidance, and supports Chinese/English/Korean/Spanish/Portuguese/Russian/Turkish
​ ​Secondary development Provides secondary development package, and opens the OpenSIC observation data format and interaction interface definition
Cloud service The powerful cloud platform provides online services like remote manage, firmware update, online register and etc.

  • Previous:
  • Next:

  • Write your message here and send it to us