Global Version 1598 Channels Imu One Camera Visual Survey South Insight V2 S1 Gnss Rtk Receiver

Short Description:

Real time layout RTK, real time layout “one step ahead”.

 By combining RTK with imaging, the layout points are marked on the spot in the image, without the need to move the rod back and forth, and can be placed with just one rod.


Product Detail

Product Tags

Fast and Precise AR Stakeout

SOUTH new palm-size RTK receiver—Insight V2, seamlessly integrated with GNSS, IMU sensor and a camera, bringing RTK surveying and stakeout into a new era. Based on integrated technology of GNSS positioning, IMU compensation, imaging, and calculating the real-time receiver’s altitude, Insight V2 provides live visual data that results in the stakeout target accurately displayed on the screen hence precise and distinct navigation to the targets; moreover, without leveling bubble.

v2
v2 v2

Virtual Guideline to Targets

AR technology superimposes a virtual guideline and distances from the target on the real-time image display; therefore, the field software can guide you to the points by live-view images that no need to worry about identifying directions, which saves time and effort

Advanced Algorithm for Positioning

V2 exploits the SoC-type GNSS board with 1598 channels for multi-constellation and multi-frequency tracking, efficiently suppresses the interference signals, and obtains higher-quality observation data from GNSS constellations. V2 will bring a leap-forward experience of RTK performance, even in harsh environments.

v2
v2

Superior Endurance

Benefiting from the SoC board and intelligent power management plan, the built-in 6800 mAh high-performance battery can support V2 continuously working for a whole daytime. And the power volume is indicated at the bottom of the receiver. Meanwhile, V2 adopts the mainstream Type-C interface, which supports web interface login and fast charging.

Brilliant Inertial Measurement Unit

Built-in high-performance IMU automatic compensator corrects the coordinates to the pole tip, assisting you to quickly and accurately measure or stake out points at will without strictly leveling the receiver. Coupling with the latest sensor program, the IMU can initiate rapidly and easily by walking a few steps only

v2
GNSS Features
Channels
1598
GPS
L1C/A, L2C, L2P, L5
GLONASS
L1C/A, L1P, L2C/A, L2P
BDS
B1, B2, B3
GALILEO
E1, E5A, E5B, E5AltBOC*, E6
SBAS
L1C/A, L5 (Just for the satellites supporting L5)
IRNSS
L5
QZSS
L1C/A, L2C, L5
L-Band
BDS-PPP, GALILEO-HAS*
Positioning output rate
1Hz~20Hz
Initialization time
< 10s
Initialization reliability
> 99.99%
Positioning Precision
Code Differential GNSS Positioning
Horizontal: 0.25 m + 1 ppm RMS Vertical: 0.50 m + 1 ppm RMS
GNSS Static
Horizontal: 2.5 mm + 0.5 ppm RMS Vertical: 5 mm + 0.5 ppm RMS
Static (long observations)
Horizontal: 2.5mm+0.1 ppm RMS Vertical: 3mm+0.4 ppm RMS
Real-Time Kinematic (Baseline<30km)
Horizontal: 8 mm + 1 ppm RMS
Vertical: 15 mm + 1 ppm RMS
RTK NTRIP
Horizontal: 8mm+0.5 ppm RMS Vertical: 15mm+0.5 ppm RMS
PPK
Horizontal: 3mm+1 ppm RMS Vertical: 5mm+1 ppm RMS
SBAS positioning
Typically < 5m 3DRMS
RTK initialization time
< 10s
IMU tilt compensation
Additional horizontal pole tip uncertainty typically less than 8mm + 0.7 mm/°tilt down to 30°, 1.8m pole height
IMU tilt angle
0° ~ 60°
Hardware Performance
Dimension
131mm(φ)× 80mm(H)
Weight
800g (battery included)
Material
Magnesium aluminum alloy shell
Operating temperature
-45℃ ~ +75℃
Storage temperature
-55℃ ~ +85℃
Humidity
100% Non-condensing
Waterproof/Dustproof
IP68 standard, protected from long time immersion to depth of 2m IP68 standard, fully protected against blowing dust
Shock/Vibration
Withstand 2 meters pole drop onto the cement ground naturally
Power consumption
4W
Power supply
6-28V DC, overvoltage protection
Battery
Built-in 7.4 V 6800mAh rechargeable Lithium-ion battery
Battery life
16h (static mode) 10h (internal UHF base mode)
12h (rover mode)
Camera
2MP
FOV
75°
WIFI
Modem
802.11 b/g standard
WIFI hotspot
Receiver broadcasts its hotspot form web UI accessing with any mobile terminals
WIFI datalink
Receiver can transmit and receive correction data stream via WiFi datalink
Communications
I/O Port
UHF antenna interface Type-C
Internal UHF
2W radio receiver and transmitter
Frequency range
410 - 470MHz
Communication protocol
Farlink, Trimtalk450s, SOUTH, HUACE, ZHD
Communication range
Typically 8km with Farlink protocol
Bluetooth
BLEBluetooth 4.2 standard, Bluetooth 2.1 + EDR
NFC Communication
Realizing close range (shorter than 10cm) automatic pair between receiver and controller (controller requires NFC wireless
communication module else)
Data Storage / Transmission
Storage
4GB SSD internal storage standard, extendable up to 32GB
Automatic cycle storage (The earliest data files will be removed automatically while the memory is not enough)
Support external USB storage
Data transmission
The customizable sample interval is up to 20Hz (Reserve)
Plug and play mode of USB data transmission
Supports FTP/HTTP data download
Data format
Static data format: STH, Rinex2.01, Rinex3.02 and etc.
Differential data format: RTCM 2.x, RTCM 3.x
GPS output data format: NMEA 0183, PJK plane coordinate, Binary code
Network model support: VRS, FKP, MAC, fully support NTRIP protocol
Sensors
Electronic bubble
Controller software can display electronic bubble, checking leveling status of the carbon pole in real-time
IMU
Built-in IMU module, calibration-free and immune to magnetic interference
Thermometer
Built-in thermometer sensor, adopting intelligent temperature control technology, monitoring and adjusting the receiver
temperature
User Interaction
Operating system
Linux
Buttons
Single button
Indicators
3 color LED indicators, and Battery indicator
Web interaction
With the access of the internal web interface management via WiFi or USB connection, users are able to monitor the receiver status
and change the configurations freely
Voice guidance
The intelligent voice technology provides status and operation voice guidance, supports
Chinese/English/Korean/Spanish/Portuguese/Russian/Turkish
Secondary development
Provides secondary development package, and opens the OpenSIC observation data format and interaction interface definition
Cloud service
The powerful cloud platform provides online services like remote manage, firmware update, online register and etc.

  • Previous:
  • Next:

  • Write your message here and send it to us